Autohelm
AutohelmAutohelm
Autohelm
SeaTalk Service Manual
4
3. Operating/Calibration Instructions
3.1 Operation
Auto
Automatic Heading
Push to engage automatic
steering and maintain current
heading.
OR
Push and hold down for 1
second to return to previous
automatic heading. (Display
returns to Auto after 10
seconds).
Previous Automatic Heading
Course Changes (-1, +1, -10, +10)
New Automatic Heading
Push to alter course to port (-)
and starboard (+) in
increments of 1 and 10
degrees.
Standby
Current Heading
Push to disengage the
autopilot for manual steering
(The previous automatic
heading is memorised).
Track (see operating hints)
Automatic Heading
Push to select track control
from Auto.
Push again to return to
automatic steering.
OR
Push and hold down for 1
second to select previous track
control heading from Auto or
Track.
(Display returns to Track after 10 seconds).
To Next Page
Loading...
