Rayovac PS1 - Page 8

<>
3. Close the Charger cover.
4. Plugthe Charger directly into
any wall socket (standard 220-240 volt AC outlet)
9. Look forthe green LED lights to go on
(fig. 5). The light indicates the battery in that
compartment is inserted correctly and taking a
charge.
If the light does not go on, check to ensure:
¥ Positive (+) sign on battery matches (+) sign on
the Charger.
¥ Battery is properly seated in compartment (only
one battery per compartment).
%# Charger is fully plugged into the electrical wall
outlet (fig. 5).
$# Battery needs charging. It may already be fully
charged.
Occasionally, a Rechargeable Alkaline Battery
inserted correctly may not cause the charging light to
go on. Leave it in the Charger, and check it in 1 hour.
If the light still does not go on, discard the battery.