H56874 4/03 www.tycothermal.com +1 (650) 474-7400 21
TTDM-128
User Manual
ENTERING A PASSWORD
When a user attempts to change a restricted setting, the TTDM-128 displays a password
prompt. The factory default password is 00010 (to change the password, see page 29). To
enter the password, proceed as follows:
▪
Use the LEFT and RIGHT arrow keys to move to each digit.
▪
Use the UP and DOWN arrows to increase/decrease the selected number.
▪
Press ENTER when complete.
NOTE: Once the password is entered, it remains in effect (allowing access) until the user
exits the main menu and returns to the Current Event/Status display, or until there has
been no keypad activity for 30 minutes.
To Next Page
Loading...
