To Next PageTo Next Page
Need help?Do you have a question about the Raytheon Anschütz 138-118 and is the answer not in the manual?
General| Brand | Raytheon Anschütz |
|---|---|
| Model | 138-118 |
| Category | Power distribution unit |
| Language | English |
Explains the CAN bus system, its architecture, and addressing principles.
Details supply voltage, current, inputs, outputs, and mechanical classification.
Identifies components on the Interface PCB, including LEDs, buttons, and connectors.
Identifies components on the I/O PCB, including LEDs, buttons, and connectors.
Details terminal boards and fuses for the E10 version of the PCBs.
Provides essential instructions for installing the unit, including safety precautions.
Covers cable stripping, screen clamping, and establishing a proper earth connection.
Specific instructions for installing optional hardware like the AC/DC Converter.
Details how to connect optional units and the DV-bus interface.
Specific instructions for establishing the DV-bus connection.
Explains the power-up sequence, noting the unit powers on with supply voltage.
Instructions for setting jumpers, primarily for bus termination.
How to use switches to activate termination resistors on the E10 version.
Specific DIP-switch settings for DV-bus applications.
Settings for CAN-bus operation.
Procedures for setting DV-bus and CAN bus addresses.
Configuring output channels and their interface formats.
Specific procedures for adjusting NMEA formats and telegram types.
Adjusting RoT output scaling and enabling magnetic compass.
Configuring the display for heading, speed, and sensor information.
Explains how to power down the distribution unit by removing supply voltage.
Detailed procedure for adjusting and calibrating the magnetic sonde.
Describes how the unit indicates errors and provides methods for diagnosis.
Using DIP-switches to enter and control the service mode.
Comprehensive tables mapping DIP-switch settings to service functions, adjustments, and display parameters.
Tables detailing the functions of DIP-switch settings for various adjustments.
Lists the various data and information that can be displayed in service mode.
Lists part numbers, descriptions, and stock information for replacement components.
Technical drawing showing physical dimensions, mounting details, and cable inlet specifications.
Schematic illustrating electrical connections, PCB layouts, and component interconnections.
