To Next Page

To Previous Page

3 The electric scooter must be traveling at least 6 mph (9.7 km/h) to set cruise control speed. To set a constant speed, press the throttle (C) and ride your scooter until you

reach your desired speed — then hold the throttle at that speed for eight (8) consecutive seconds. The electric scooter will beep (sound) once and the cruise control icon (B)

will appear on the display, indicating that the electric scooter is now set at the desired speed. Once set, you can take your thumb off the throttle and your electric scooter

will maintain that set speed. Using any control such as pressing the throttle or squeezing the brake lever will deactivate the speed setting and the cruise

control icon (B) will dissapear from the display. Your speed setting will not be saved and you will need repeat step 3 to reset to your desired speed.

2 While stationary, to enable the cruise control mode, press the power button (A) quickly

four (4) times. The electric scooter will then beep (sound) once and the display will illuminate the cruise

icon for a few seconds (B).

1 The cruise control mode is controlled by the

power button on the display (A).

USAGE

Note: The C45 display default

setting is in miles. If you would like

to change the display setting to

kilometers, press the power button

(A) three times quickly to select the

kilometers setting.

Changing the Speed Mode

There are three modes for speed. The C45 is set on the Sport (19.9 mph (32 km/h)) speed setting at the factory. Press power button twice quickly to select

the speed mode.

Using and Setting Cruise Control

The C45 electric scooter features Cruise Control. While activated, this feature will automatically keep your electric scooter running at a set speed. This

allows you to ride without having to constantly press on the thumb throttle. Practice in an open area free from obstacles until you are familiar with the cruise