Razor California Longboard - Assembly Instructions; Handlebar Assembly Steps; T-bar and Fork Alignment

1
4
2
5 6
3 Check to ensure wheel and
handlebars are aligned.
3
ASSEMBLY INSTRUCTIONS
WARNING: Failure to
properly engage the spring-loaded
buttons may cause the handlebars
to dislodge while riding and may
cause you to lose control and
fall. When correctly engaged, the
handlebars will not rotate nor will
they move sideways. Note that
when properly engaged, the spring-
loaded buttons are clearly visible in
the holes on the T-bar.
T Handlebar
T T-bar
WARNING: Failure to
properly install and tighten the
collar clamp may cause the rider
to lose control and fall. If you do
not understand these instructions,
please contact Razor customer care
for assistance.