7. Maintenance and Cleaning
The filtering system prevents the large food residue or other objects from entering the washing
pump. Cleanup and maintain the filtering system for better use.
Cleaningthe Filter
Ilp ro
1 Lift the Flip row up go degrees until the filter can be fully seen.
2. Rotate the filter counterclockwise to take out.
3. Disassemble3 parts of the filterto clean.
4. Reassemble the filter back and insert it back into the dishwasher. Rotate clockwise to reinstall
5. Put the Flip row back down.
A WARNING!
1.Donot operate the dishwasher without the filter installed.
2.Duringcleaning,do not knockonthe filter which mavcausefilter deformationand lower
washing performance.
Cleaningthe Spray Arm
The sprayer should be cleaned periodically as the substances in tap water mav block the water
ports and spinning axle. Usemild soapy water to rinse the sprayer and brush the holes gently.
completely rinse clean and reinstall.
Pull upward on the sprayer to remove
• Use a fine tool or brush to clean the
the sprayer holes
A WARNING!
Never use a spray cleaner to clean the door panel as it could damage the door lock and electrical
components.It is not recommendedto useabrasiveagentsor somepapertowels becauseof the
risk of scratching or leaving spots on the stainless steel surface.
12
To Next Page
Loading...