RBP RX3 Series User Manual

RBP-1128B-RX3
RBP-1128SS-RX3
Page 1 of 4 4/17/19(AL)
13000 Temple Ave. City of Industry, CA 91746 1-877-519-9090
2019 CHEVY SILVERADO 1500 DOUBLE CAB RX3
HARDWARE INCLUDED
RECOMMENDED TOOLS
1
Driver/Left Side RX3 Step
16
8mm Lock Washers
13mm Socket or Wrench
1
Passenger/Right Side RX3 Step
16
8mm x 24mm x 2mm Flat Washers
16mm Socket or Wrench
4
Driver/Left side Mounting Brackets
16
10-1.50mm x 35mm Hex Bolts
17mm Socket or Wrench
4
Passenger/Right side Mounting Brackets
32
10mm x 27mm x 3 Flat Washers
3/8 Torque Wrench
16
8-1.25mm x 30mm Hex Bolt
16
10mm x 27mm x 3 mm Nylon Lock Nuts
3/8 Ratchet w 3” & 6” Extensions
Passenger/Right
Driver/Left
Passenger/Right
Bracket
Driver/Left
Bracket
Front

RBP RX3 Series Specifications

General

Brand	RBP
Model	RX3 Series
Category	Automobile Accessories
Language	English

Summary

Driver-Left Side Installation

Prepare Vehicle and Locate Mounting Holes

Move vehicle to level location, remove old steps, and identify threaded mounting holes on the body.

Attach Mounting Brackets

Bolt mounting brackets to threaded holes using specified hardware, leaving loose for adjustment.

Attach Side Step to Brackets

Hold side step, attach to brackets with bolts, washers, and nuts, keeping hardware loose.

Final Tightening and Adjustment

Level and adjust the installed side step, then fully tighten all hardware to specified torque.

Passenger-Right Side Installation

Repeat Installation Steps

Perform steps 2 through 5 on the passenger side of the vehicle to complete the installation.