Calibration
This is the place where you can calibrate sticks and pots. Follow the on-screen instructions, and note that when
asked to center the sticks this includes the throttle stick and the 2 sliders. S1 and S2 pots however do not need to
be centered, only the extremes are calibrated.
Model menus
A SHORT press of the MENU key from the main views brings up the model selection screen. There models can be
selected, deleted, backed up and restored to/form SD card using the menu brought up by a LONG press on the
ENTER key. They can also be copied or moved (one SHORT press on ENTER key highlights the line, +/- create
and place a copy of the model on the desired slot, while two SHORT presses create a dotted outline where +/-
simply move the selected model to another slot.)
Model setup
A SHORT press of the PAGE key brings up the basic model setup page:
14
To Next Page
Loading...