EasyManua.ls Logo

RC4WD Gelande - Precautions; Operating Locations; Pre-Operation Inspection; Post-Operation Procedures

RC4WD Gelande
6 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
To Prevent Serious Personal injury and/or property
damage, operate all remotely controlled models in a
responsible manner as outlined below.
Choose the right location to operate your remote control
model.
1. Do not run on public streets or highways.
2. Never operate your R/C near people or animals.
3. Do not operate in confined spaces.
4. Do not operate indoors.
Inspect your R/C before operation.
1. Make sure all screws and nuts are tightened properly. It is
a good idea to use thread-locker on all metal to metal lo-
cations.
2. Make sure your transmitter batteries are fresh, or fully
charged.
3. Always run a test of your transmitter and truck before
setting on the ground.
After operation of your R/C model
1. Turn of receiver first, then turn off the transmitter.
2. Be careful handling your R/C batteries as they can be hot.
3. Keep your RC model clean and free of excess dirt and
debris.
4. Perform regular maintenance to the drive line parts of
your R/C model.
1
Precautions
10
RC4WD Gelande
Check out
www.rc4wd.com
for more new products.
You can also find a line of
shirts and beanies.

Related product manuals