Use the Adapter/Charger to Power Your Camcorder
The adapter/charger attaches to the camcorder and lets you power your camcorder
directly from standard household power. The adapter/charger operates on 100-240
volts, 50/60 Hz, so it can be used virtually anywhere in the world to power the
camcorder or recharge the battery.
To AC 100-240,
50/60 Hz
,19(7OUT
Jack
Adapter/
Charger
Cable
DC In Jack
Attach Adapter/Charger
1. Connect one end of the DC cable to
the DC OUT jack on the adapter/
charger.
2. Connect the other end of the DC cable
to the DC in jack on the camc0rder as
shown above_
.
Plug the adapter/charger's plug into
the nearest AC outlet (100-240V,
50/60Hz).
Remove Adapter/Charger
1. Unplug the adapter/charger from the
wall outlet.
2. Remove the DC cable from the
adapter/charger and camcorder.
Using an Optional Plug Adapter
An optional plug adapter might be
required in some countries.
Optional AC / AC 100-240V
Adapter
1. Plug the adapter/charger's plug into
the AC plug adapter. •
2. Plug the AC plug adapter into the AC
_ outlet.
12
To Next Page
Loading...
