Exposure Control
The camcorder controls the iris for you when the AE dial is set to AUTO.
The camcorder adjusts brighmess automatically under normal condi-
tions. You might need to adjust brightness manually when the back-
ground is too bright or too dark in comparison with the subject.
MENU Dial
(Rotate or Press In)
Auto Exposure
The camcorder adjusts the iris for
the best possible picture during
auto exposure.
• Set the AE dial to AUTO to turn on the
auto exposure feature. No exposure
indicator appears in the viewfinder.
Manual Exposure
You may need to adjust exposure
manually under certain conditions, such
as those listed on the next page.
1. Set the POWER switch to CAMERA,
and make sure the AE dial is not set
to A UTO.
40
To Next Page
Loading...
