o
Attach the adapter/charger.
ToAC 100-240,
50/60 Hz
Adapter/
Charger
PUT
Jack
Cable
_DC In Jack
Since the battery must be charged
before it can be used the first time,
attach the adapter/charger to the
camcorder.
Connect one end of the DC cable
to the DC OUT jack on the
adapter/charger.
• Connect the other end of the DC
cable to the DC in jack on the
camcorder as shown above.
• Plug the adapter/charger's plug
into an operating outlet.
3. Adjust the handstrap to fit your hand. ___
_d LENS
Cover
Control
Handstrap
strap Velcro
trip (Under Flap)
Lift the flap on the
handstrap and separate
the velcro strip.
Insert your hand, adjust
the strap to fit snugly,
refasten the strap, and
close the flap.
4. Slide LENS COVER control to open lens cover. •
4
To Next Page
Loading...
