Playback Features (continued)
VCR < < Button
COUNTER
R/M Button
Button
I_1_ Button
;TOP Button
Time Counter
The time-counter display shows the actual time elapsed when playing back a
segment of tape. The memory-stop feature helps locate a certain point on the
tape. Turn memory stop on to stop the tape automatically during rewind or fast
forward when the time counter reaches M 0:00:00.
To Use the Memory-Stop Feature
lo
Locate the place on the tape you want
to return to, set the POWER switch to
VCR, and press COUNTER R/M for
more than two seconds to reset the
counter to 0:00:00.
R 0:00:00
2. Press COUNTER R/M for less than
one second to turn the time counter's
memory-stop feature on or off.
When memory stop is on, an M
appears before the time counter.
3. Continue to play the tape. When you
want to return to the place you
marked, press the STOP button.
4. Press VCR'<<. The tape rewinds to
the time counter reading of
M 0:00:00.
, Time Counter With Memory
Stop Turned On
63
To Next Page
Loading...
