RCA CRCU303 User Manual

If your TV, VCR or Cable Box does not respond to your remote after you
have tried all the codes for your brand, try searching for your code. For
example, to find your TV code:
Program a device button using Code Search
To set up a TV:
1.
2.
3.
4.
5.
6.
7.
Manually turn on your TV (turn on VCR or
Cable Box when setting them up).
Press the TV button (Substitute the VCR or
CABLE button when programming the VCR
or Cable Box).
Press and hold CHANNEL DOWN and the TV
button until the Indicator Light blinks
twice (substitute VCR or CABLE when search-
ing for VCR or Cable Box codes).
Press CHANNEL DOWN three times.
Alternate between POWER and the TV
button until the TV turns off (you may
have to repeat 60 times at a rate of
once per second).
When the TV turns off press CHANNEL DOWN,
the Indicator Light will blink twice.
Substitute the VCR or CABLE button for TV if
you are searching for the VCR or CABLE
BOX code.
PRESS
& HOLD
CHANNEL
v x3
CHANNEL
v
BLINKS
TWICE
I
5

RCA CRCU303 Specifications

General

Brand	RCA
Model	CRCU303
Category	Remote Control
Language	English