2
Step 2: Connections
Option 1: Basic connection to TV
Connect your existing antenna cable to the
ANTENNA IN jack of the Converter Box.
Connect the RF coaxial cable (supplied) from the
OUTPUT TO TV jack of the Converter Box to the
ANTENNA jack of the TV set.
Slide the CH3/CH4 selector on the back of the
Converter Box to the channel that is not in use in
your area. The Converter Box will send its video signal
to either Channel 3 or 4 on your TV.
Connect the Audio/Video cables (not supplied) from
the AUDIO / VIDEO output jacks (yellow, white, red)
of the Converter Box to the Audio/Video IN jacks on
the TV set. If there are more than two sets of Audio/
Video jacks on the TV set, connect only either INPUT1
or INPUT2 to those of your converter box.
Connect the AC power cable of the Converter Box to
a suitable wall outlet.
Tip:
Using the optional Audio/Video cable
connection provides better picture quality in
case your TV set has Audio/Video input available.
Note:
You may choose to connect the RF coaxial cable
to TV, or Audio/Video cables to TV, or both the
RF coaxial cable and AV cables to TV.
1
2
3
4
5
AC120V
60Hz
(Optional)
From antenna
Option 2 : If you also need to connect your VCR
AC120V
60Hz
From antenna
Connect your existing antenna cable to the
ANTENNA IN jack of the Converter Box.
Connect the RF coaxial cable* (supplied) from the
OUTPUT TO TV jack of the Converter Box to the
ANTENNA IN jack of the VCR.
Connect the RF coaxial cable* (not supplied) from the
ANTENNA OUT jack of the VCR to the ANTENNA IN
jack of the TV set.
Slide the CH3/CH4 selector on the back of the VCR to
the channel that is not in use in your area. The VCR will
send its video signal to either Channel 3 or 4 on your TV.
Slide the CH3/CH4 selector on the back of the
Converter Box to the channel that is not being used
by the VCR; e.g., if you set the VCR selector to CH3,
slide the Converter Box selector to CH4.
Connect the AC power cable of the Converter Box to
a suitable wall outlet.
1
2
3
4
5
6
Note:
The SMART ANTENNA IN jack lets you connect a Smart Antenna. Refer to the antenna’s user manual for proper connection.
Smart Antenna provides improved reception. For more information, please consult your TV dealer.
* You can also use Audio/Video cables (similar to option 1) if the connection jacks are available on the VCR and TV.
To Next Page
Loading...
Need help?
General
