8
Press the icon in the Live View screen to access the following
customizable parameters of your camera.
Audio turns audio on/off for recording and live viewing.
Night Vision turns the camera’s night vision feature on/off.
Alarm Notication lets you set notication schedules for when you
want to receive alerts. Also lets you set the motion detection area for
alerts and the detection sensitivity, as well as the sound the camera
makes when motion is detected.
Battery shows you how charge the camera’s battery has.
Auto Hibernate pauses recording until motion is detected.
Time Zone, Daylight Savings Time, and Date Format let you adjust
the time zone, daylight savings time, and date format settings you
made during setup.
Wi-Fi lets you change WiFi network information for your camera and
keep the device active on the new network. This is a convenient option
if you get a new wireless router, for example.
Storage Status lets you format the inserted memory card. A dot next
to this item in the menu means that the SD card requires attention.
Device Version shows you the rmware version of the camera. A dot
next to this item in the menu means that a rmware update is available.
Choose this option and following the instructions to update.
Image Encryption increases the security of the video from the camera.
This option is on by default.
Tour of the System: Using the Settings Menu
Tour of the System: Camera
Indicator light shows the camera’s status:
solid red — the camera is starting up
solid blue — video is being viewed in the App
slow ashing blue — the camera is working
fast ashing blue — the camera is ready for
WiFi setup
slow ashing red — there’s a network problem
or the camera’s battery is charging
fast ashing red — there’s an SD card problem
Front
To Next Page
Loading...
Need help?
General
