The dishes were not
loaded correctly.
See notes in " Loa ding the Dishwa sher Baskets ".
Select a more intensive programme.
See" Wash Cycle Table ."
Use more detergent, or change yo ur detergent.
Rearrange the items so that the sp ay can rotate freely .r
Clean and/or fit the filter combination correctly.
Cl ean the sp ay ar m jets. See "Cle aning the Spray
Arms".
r
Use less detergent if you have soft water and select
a shortest cycle to wash the glassware and to get
them clean.
Use a mild abrasive cleaner to eliminate those marks.
Re-loading the dis hes p roperly.
Lo ad the dishwasher as suggested in the directions.
Increase the amount of ri nse-aid/R efill the rinse-aid
dispenser.
Do not empty your dishwasher immediately a fter
washing. Open the door slight ly so that the ste am can
escape. Begin unloadin g the dishwasher only once t
he dishes are barely wa rm to the touch. Empty the low
ba sket first. This p revents water form dr oppin g off
dishes in the upper basket.
In short progr ammes the washing temperature is lower .
This also lowers cleaning perf ormance. Choose a
program me with a long wash i ng time.
Water drainage is more difficult with these items.
Cutlery or dishes of this type are not suitable for
washing in the dishwasher.
The programme was
not powerful enough.
Not enough detergent
was dispensed.
Item are blocking
thepathofspayarms.r
The filter combination
in the base of wash
cabinet is not clean or
is not correctly fitted.
This may cause
the sp ay arm jets
to get block ed.
r
Combination of soft
water and too much
detergent.
Aluminum utensils
have rubbed against
dishes.
Dishes block
detergent cups.
Improper loading
Too little ri nse-a id
Dishes are removed
too soon.
Wrong programme
selection
Using cutlery with
a low-quality coating
If overflow occurs, turn off the main water supp ly befo re calling a service.
If there is water in the base pa n because of an overfill or small leak,
thewatershouldberemovedbeforerestartingthedishwasher.
18
Unsatis
-fa ct ory
washing
re sult
Unsatis
-fa ct ory
drying
re sult
When som e malfunctions come on, the a pplianc e will di splay error codes to warn you:
Longer inlet time.
Faucets is not opened, or waterintake is restricted,
or wa ter pressure is too low.
Some element o f di sh washer leaks .
Overflow.
To Next Page
Loading...
Need help?
General
