6
3
2
1
4
5
6
7
ON
Operating Your Freezer
• Once the freezer is in its proper place, plug it in an electrical outlet
having 115 volts and 15 amps.
• Set the temperature, on the temperature control knob. “1” being the
warmest and “7” being the coldest. Initially set the temperature on “4”.
Place food inside the freezer. After using the freezer for 24 hours set
the freezer to your desired setting.
• In case you unplug your freezer or experience an electrical outage,
allow 5 minutes before plugging it back in.
General Features
Adjustable temperature dial: (see fig. # 1)
Your freezer will automatically
maintain the temperature level you
select. The temperature control dial
has 7 settings plus ON. “1” is the
warmest, “7” is the coldest. Set the
dial to “4” and allow 24 hours to pass
before adjusting the temperature to
your needs.
fig. # 1
For faster freezing capability:
The first time you turn the unit on,
turn the temperature control dial to
“ON” and run for at least 2 hours,
then turn dial to “4”.
(Note: If the freezer has been
placed in a horizontal or tilted
position for any period of time
wait 24 hours before plugging
the unit in.)
Freezer Features and Use
Compressor on
indicator (green)
Normal Operating Sounds You May Hear
• Boiling water, gurgling sounds or slight vibrations that are the
result of the refrigerant circulating through the cooling coils.
• The thermostat control will click when it cycles on and off.
To Next Page
Loading...
Need help?
General
