TH E LIQUI D CRYSTAL DISPLAY
Function COMode indicators
indicator I
RAOIO REPEAT 1 ALL PROGRAM SHUFFLE PLAY PAUSE
MHz
14f:f4fa!
Mute
indicator
SCAN FLAT ROCK JAZZ
Don't Worry...It Won't Bite
So you think the display looks
intimidating. Don't worry, you
won't see all of this stuff at the
same time--you'll only see what
you need to see.
Note: the display is back lit for
model RP-7988 only.
FM Stereo indicator
Digital EQ indicator
Number indicator fort Radio Band SEEK/SCAN
• Preset radio stations Indlcator indicator
• Track
• Volume level
• Custom EQ level (RP-7988) See page 12..
Tuner {ndicaton
* Radio station
• CD playing time
• Display Messages
, Custom EQ Iband (RP-7988). See page 12.
The following list of display information is presented in alphabetical order and corresponds to the items
in the preceding graphic.
CD Mode Indicators: Show the current CD function mode.
Digital EQ Indicator: Shows which preset option you have chosen
(ROCK, JAZZ, VOCAL, or FLAT).
FM Stereo Indicator: Displayed when you are receiving stations in FM Stereo mode. (The station must be
broadcasting in stereo as well.)
Function Indicator: Shows the current function (RADIO, DISC, or TAPE).
Mute: Displayed when you press MUTE on remote control (RP-7988 only) or when you set volume control
on the unit to 00 position.
Number Indicator: Depending on the current mode, shows the preset number for radio stations, the
track number of a CD, or displays the volume setting when adjusting the volume.
Radio Band Indicator: Shows the current radio band.
SEEK/SCAN Indicator: SEEK or SCAN is displayed depending on which method of radio tuning you are
using.
Tuner Indicator: Shows information such as the radio station frequency, the CD playing time, and
display messages.
.4
To Next Page
Loading...
Need help?
General
