CD / MP3 Player
34
Program playback
Edit program
1. In stop mode, press and hold RPT / PGM on the main
unit or SHIFT 9 / PROGRAM on the remote control to dis-
play program edit playlist.
2. The box under “TRACK” will be highlighted. Press UP or
DOWN arrow buttons or number buttons to select track.
Press OK.
3. “Add” will be highlighted automatically after track is
selected. Press OK to add selected track onto playlist.
4. Repeat steps 2 and 3 to add additional tracks to the pro-
gram.
5. Move to highlight “Play” (start program playback) or
“Done” (return to normal playback with program saved)
and then press OK to confirm program playback.
Delete Program
1. In stop mode, press and hold RPT / PGM on the main
unit or SHIFT 9 / PROGRAM on the remote control to dis-
play program edit playlist.
2. Use the LEFT or RIGHT arrow to select Playlist, then use
the UP or DOWN arrows to select and highlight the
programmed track you want to delete on the playlist.
3. Use the arrow buttons to highlight “Delete” and then
press OK to delete track.
4. Highlight “Play” (to start program playback) or “Done”
(to return to normal playback with program saved) and
then press OK.
Insert track
1. In stop mode, press and hold RPT / PGM on the main
unit or SHIFT 9 / PROGRAM on the remote control to dis-
play program edit playlist.
2. Use the arrows to highlight item on the playlist where
you want to insert a track before it.
3. Refer to “Edit program” to select a track to be inserted.
4. Highlight “Insert” and then press OK
5. Highlight “Play” (start program playback) or “Done”
(return to normal playback with program saved) and then
press OK.
Cancel program
Program will be cancelled when;
1. disc tray is opened;
2. power is turned off;
3. STOP is pressed twice. The red PGM indicator will
disappear on display and player will resume normal play-
back mode. Nevertheless, the program will remain in mem-
ory and can be recalled by pressing PROGRAM again.
To Next Page
Loading...
Need help?
General
