RCF L-PAD 10C - Page 35

35
ENGLISHITALIANOFRANÇAISESPAÑOLDEUTSCH
SPECIFICATIONS
Mono channels
Microphone input
Frequency response
Distortion (THD+N)
Gain range
Max. input
LOW CUT
SNR
Phantom power
Line input
Frequency response
Distortion (THD+N)
Sensitivity range
Compressor
Stereo input channels
Mic input
LOW CUT
Line input
Frequency response
Distortion (THD+N)
Sensitivity range
SNR
Channel EQ
High
Mid
Low
2-TRACK IN
TAPE IN
Frequency response
Distortion (THD+N)
Gain range
L-PAD 10C
XLR balanced
10 Hz to 55 kHz,+/‑3 dB
<0.03% @ +0 dB, 22 Hz~22 kHz A‑weighted
0 dB to ‑50 dB
+15 dB
75 Hz
<‑100 dBr A‑weighted
+48 V with switch control
1/4’ TRS balanced
10 Hz to 55 kHz,+/‑3 dB
<0.03% @ +0 dB, 22 Hz~22 kHz A‑weighted
+15 dB~ ‑35 dB
GAIN: 0~9 dB | THRESHOLD: 20 dB ‑‑‑> 5 dB
XLR balanced
75 Hz
1/4’ TRS or TRS/RCA unbalanced
10 Hz to 55 kHz,+/‑3 dB
<0.03% @ +0 dB, 22 Hz~22 kHz A‑weighted
+15 dBu~ ‑35 dBu
<‑100 dBr A‑weighted
Mono channel Stereo channel
+/‑15 dB @12 kHz +/‑15 dB @12 kHz
+/‑15 dB @2.5 kHz
+/‑15 dB @80 Hz +/‑15 dB @80 Hz
RCA jack
10 Hz to 55 kHz,+/‑3 dB
<0.03% @ +0 dB, 22 Hz~22 kHz A‑weighted
OFF to 0 dB
STEREO RETURNS
Input
Frequency response
Distortion (THD+N)
GAIN range
SNR
Impedances
Microphone input
All other inputs
Tape out
All other outputs
Main mix section
Max. MAIN MIX output
AUX range
Fader range
PHONES/CONTROL ROOM range
Hum & noise
Crosstalk
Power supply
AC adaptor
Power consumption
1/4’ TRS unbalanced
10 Hz to 55 kHz,+/‑3 dB
<0.03% @ +0 dB, 22 Hz~22 kHz A‑weighted
OFF TO +10 dB
<‑100 dBr A‑weighted
1.8 kΩ
10 kΩ or higher
1 kΩ
120 Ω
+22 dBu unbalanced
OFF to +10 dB
OFF to +10 dB
OFF to +10 dB
<‑80 dB @ 20 Hz~22 kHz A‑weighted 1 channel & MAIN level:0 dB, other channels: minimum
<‑80 dB @0 dB 20 Hz~22 kHz A‑weighted, MAIN level:0 dB, other channels: minimum,
18 V AC / 1000 mA
24 W (all loaded)
SPECIFICATIONS / SPECIFICHE / SPÉCIFICATIONS / ESPECIFICACIONES / TECHNISCHE DATEN