- 9 -
"00.0%" when different parts are measured
6. maintenance 》 》
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
6.1）When the battery power is low, the backlight will
be dim. To ensure accurate measurement of the
instrument, please replace with new batteries in
time.。
6.2）Use a dry and soft cloth to wipe off the dirt on the
instrument. Do not use detergents or solvents.
6.3）Do not stick any labels or nameplates (especially
metal nameplates) on the sensor. Please use the
attached protective cover to store and carry the
instrument.
7. Waste treatment 》 》
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Damaged instruments, accessories (batteries, etc.),
and packaging materials must be recycled and reused
in a manner that meets environmental protection
requirements.
To Next Page