- 7 -
Ideally, the thickness of the measured material should
be at least 19mm.
If your test object is too thin, the instrument will
measure the material below it and produce inaccurate
readings. One way to compensate for thin materials is
to stack measurement materials.
warning：
This instrument is a capacitive value detection
instrument, please do not use it for non-capacitive
moisture measurement. Such as metal, conductive
film and other conductive objects.
5. NOTE 》 》
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
1） In the process of storage and use, you must pay
attention to keep the instrument dry and clean to
ensure the accuracy of the measurement.
2）When the instrument is not in use, please store the
instrument in a stable, dust-free, and avoid direct
sunlight。
3） During the use of the instrument, please do not
To Next Page
Loading...