To Next PageTo Next Page
Need help?Do you have a question about the Real Flame PIT FIRE SERIES and is the answer not in the manual?
General| Brand | Real Flame |
|---|---|
| Model | PIT FIRE SERIES |
| Category | Outdoor Fireplace |
| Language | English |
Details the warranty coverage for the Real Flame gas burner and its parts.
Explains the mandatory process for registering the product to receive warranty benefits.
Lists conditions under which Real Flame is not obligated to replace or repair the product.
Defines the scope of warranty liability, limited to repair or replacement.
Outlines the procedure and required information for making a warranty claim.
A slight smell may occur during initial use due to paint curing.
Covers placement, flammable materials, aerosols, and modifications.
Notes on luminous flames and normal carbon deposits, not covered by warranty.
Exercise caution with naked flame, especially around children and the infirm.
Primarily decorative, not certified as a space heater.
Select outdoor location, ensure clearances from combustibles and proper enclosure ventilation.
Details requirements for ventilation in enclosures for natural dispersion of gases.
Illustrates various enclosure types (Examples 1-5) for safe appliance installation.
Enclosures must be stable, non-combustible, above ground, with adequate drainage and specific venting.
Step-by-step guide for lighting the pilot and main burner.
Details options for 240V/24V ignition switches and air pressure switches.
Ensures proper ventilation clearance and safe placement of gas controls to prevent explosion risk.
Illustrates enclosure setups with power isolation, isolation valves, and access panels.
Provides dimensions for optional glass surrounds and their installation notes.
Details when optional glass surrounds are required and how to fit them.
Refers to notes on the next page regarding gas cylinder placement for portable units.
Covers cylinder retention for LPG systems.
Specifies ventilation requirements for LPG cylinder enclosures.
Ensures the cylinder valve is accessible for manual operation.
Guidelines for safely installing LPG cylinders on a firm, level base.
Defines safe clearance distances around LPG cylinders and ignition sources.
Details typical masonry enclosure requirements including height, access, and ventilation.
Details typical fabricated enclosure requirements including barriers, ventilation, and access.
Key notes on enclosure venting, stability, media, LPG storage, and radiant heat effects.
Verify gas type and ensure gas isolation valve is accessible and protected.
Ensure wiring is safe, customer is trained, and installation codes are followed.
Perform gas leak tests and check/adjust gas pressures before operation.
Appliance must be supervised at all times during operation.
Illustrates the wiring configuration for a 240V direct connection.
Shows the wiring for a 24V system with a wall-mounted transformer.
Checks for gas leaks, lighting, and burner pressures before installing media.
Instructions for filling the tray with volcanic rock, avoiding pilot area.
Warns about spitting from new/wet media and recommends initial firing.
Instructions for laying glass media over volcanic rock, avoiding pilot area and overfilling.
Instructions for filling with glazed pebbles, avoiding pilot area and overfilling.
Warns about spitting from new/wet media and recommends initial firing.
Instructions for using volcanic rock with ceramic logs, avoiding pilot area and overfilling.
Warns about spitting from new/wet media and recommends initial firing.
Notes on live fuel effect, luminous flames, carbon deposits, and log cleaning.
Do not operate if gas is smelled, ensure fire is covered when not in use, avoid water submersion.
Step-by-step guide to ensure gas supply, electrical supply, and ignite pilot/burner.
New/wet media may spit; maintain safe distance until media is dry.
Alerts on high temperatures, recommends guards, and schedules periodic servicing.
Troubleshooting for pilot not lighting, checking gas, electrical, and electrode.
Possible causes include blocked pilot flame or faulty thermogenerator.
Addresses issues with flame size (too little/large) and color (yellow/tall).
Detailed procedure for converting the appliance from natural gas to propane.
Identifies the main valve component.
Lists pilot assemblies for both natural gas and propane.
Lists injectors for natural gas and ULPG.
Identifies the gas controller module CNE CCA-0835.
Provides email, website, phone, and fax details for the supplier.
Gives the address of the physical showroom.
