Rebell SC2060S - On-Screen Indicators; Indicator Meanings; Mode Selection; COMP Mode

On-screen indications
The below-listed indicators are used to indicate the correct condition of the
calculator.
Example of an on-display indication:
Indicator Meaning
The second function of a key – after the key “2nd” is pressed.
Alphabetic notation (A ~ D, M, X ~ Y) activated.
M A number is stored in memory.
STO Activation of a mode for storing variables.
RCL Activation of a mode for recalling variables.
STAT Activation of a mode for statistic calculations.
Math Mathematic notation activated.
Angular units.
FIX Fixed number of decimals.
SCI Scientic notation activated.
▲▼ Possible display of former or later calculations.
Disp
The displayed value is an intermediate result of a multi-level
function carried out.
Mode selection
Press [MODE/SET UP] to recall the menu and select a respective calculation
mode.
COMP: This mode is suitable for basic calculations including scientic
calculations.
STAT: Performing regression and statistical calculations of one or more
variables.
TABLE: This mode displays the dened functions in the form of a table.
An example of settings the “STAT” mode: press
[MODE/SET UP] and then
press [2] .
Calculator settings
Press [2ND][MODE/SET UP] to display the menu for setting an input/output
format, angular mode, numeric writing, setting of statistics and contrast. The
menu consists of two screens that can be switched by pressing [▼] and [▲] .
MthlO: A mathematical mode that displays notation using standard
mathematical symbols.
2–EN