Reborn Launch Wakeboard Tower Polished

To Next Page

Reborn Launch Wakeboard Tower

Polished

Installation Guide

Our Reborn Launch Wakeboard Tower uses many common parts with

unique design features that make it aff-ordable, adjustable, and easy to

install, fast to fold down and erect. Nice designed bracket to hold the

tower stay at the position for storage. It is a forward-facing design and

there are five main components -- Top Section, Left Leg, Right Leg, side

bars and mounting bases.

Need help?

Do you have a question about the Reborn Launch Wakeboard Tower Polished and is the answer not in the manual?

Summary

Important Notes for Installation, Maintenance, and Use

Installation Preparation and Steps

Inventory of Parts, Hardware, and Tools

Take inventory of all components and tools required for installation.

Begin Installation Process

Introduction to the process of assembling the tower on the ground before mounting.

Step 1: Ground Assembly

Assemble the tower on the ground following exploded drawings without tightening bolts.

Step 2: Determine Placement

Identify the best place to fit the tower on your boat using elevation drawing measurements.

Step 3: Prepare Mounting Area

Cover mounting areas with tape, check for hazards, and triple-measure attachment points.

Step 4: Attach to Deck Mounts

Attach the tower onto the deck mounts, ensuring base bars are vertical for folding.

Step 5: Secure Top Section

Re-assemble tower top, drill holes, and tighten hardware for installation completion.

Step 6: Final Tightening

Double check the tower's position and fasten all bolts and screws securely.

How to Fold the Tower

Care and Maintenance