Red Bull Racing RB-RTEEN85

To Next Page

USER MANUAL FOR E-SCOOTER RB-RTEEN85

Red Bull® Marks and the Red Bull Racing Logo are licensed by Red Bull GmbH/Austria

Need help?

Do you have a question about the Red Bull Racing RB-RTEEN85 and is the answer not in the manual?

Overview

Red Bull Racing E-Scooter RB-RTEEN85

Red Bull Racing E-Scooter RB-RTEEN85

This document provides the user manual for the Red Bull Racing E-Scooter RB-RTEEN85, an electric kickscooter designed for personal entertainment.

Function Description

The Red Bull Racing E-Scooter RB-RTEEN85 is an electric kickscooter that provides personal mobility. It features a display on the handlebar to show speed, mileage, and battery status. The scooter is equipped with a front LED light for visibility and a disc brake for stopping. It offers three speed modes and has a folding mechanism for easy transport and storage.

Important Technical Specifications

Maximum speed: 20 Km/h (dependent on rider weight and terrain conditions)
Motor power: 350 W
Endurance mileage: up to 20 km (depending on ground, inclination, speed, driving style)
Climbing gradient: 10 degrees
Power supply for charger: AC 110-240V, 50/60Hz
Battery: 7,500mAh Lithium rechargeable battery
Battery power: 270 Wh
Battery voltage: 36V d.c.
Charging temperature: 0°C-40°C
Storage relative humidity: 5%-95%
Working temperature: 0°C-40°C
Charging time: 4-5 hours approx.
Body dimensions: 110 x 43 x 114 cm approx.
Folded body dimensions: 110 x 20 x 50 cm approx.
Net unit weight: 14 kg approx.
Wheel diameter: 8.5 inches
Maximum loading: 120 kg
Minimum loading: 30 kg

Usage Features

Unfolding and Folding: The kickscooter comes folded in its box. To unfold, pull the handlebar from the rear wheel upwards, then close the handlebar lever. Ensure the interlock button is reset. For first use, assemble the vertical handlebar and tighten the 4 screws with a screwdriver. To fold, open the interlock button, pull out the handlebar clamp, fold the handlebar, and hook it to the rear wheel.

LED Display: The LED display is located on top of the handlebar.

Power On/Off: Long press the power button for 3 seconds to turn the e-scooter on or off. The unit automatically turns off after 10 minutes of inactivity.
Current Speed (1): Displays speed in Km/h. Can be switched to MPH by quickly pressing the power button three times.
Bluetooth Symbol (2): This function is not active for this product and will not light up.
Mileage Display (3): Shows ODO (total mileage) when powered on and TRIP (single trip distance) during normal use.
Light Indicator (4): Lights up when the front LED light is on.
Warning Indicator (5): Blinks when the battery is almost empty (all four battery capacity bars are off). Stop riding and charge the battery for safety.
Battery Capacity (6): Displayed by four bars, from 100% (full) to 0% (empty). One bar indicates very low battery.
Speed Mode (7):
- Gear 1: Low speed (10km/h max)
- Gear 2: Mid speed (15km/h max)
- Gear 3: High speed (20km/h max) Short press the power button once to switch between gears. It is suggested to change gears only when the kickscooter is stopped for safety reasons.
Cruise Indicator (9): This function is not active for this product and will not light up.
Brake Indicator (10): Lights up each time the brake is used.

Riding Instructions:

Ensure the battery is fully charged before first use.
Place one foot on the pedal, keeping the other on the ground. Hold the handlebars with both hands.
Push off with the foot on the ground and gently press the accelerator lever on the right handle to accelerate.
Place the second foot on the platform once the e-scooter is in motion.
To brake, pull the brake lever on the left handle.
To stop, release the accelerator and remove one foot from the pedal, then the other.
Turn off the display when finished.
Use the kickstand to keep the e-scooter standing alone.

Safety Drive:

Always wear a helmet, knee protections, and elbow pads.
Wear comfortable flat shoes.
Verify local laws regarding e-scooter use.
Always check battery level; low battery can cause sudden stops.
Not suitable for children under 10; adult supervision required for minors under 18.
For personal entertainment only; prohibited as public transportation or on vehicle roads.
Do not carry goods while driving.
Pay attention to surroundings (objects and people).
Avoid sudden starts or stops.
Do not use on streets, in traffic, or at night.
Do not drive in dark places.
Drive on smooth, flat grounds.
Do not ride up or down stairs or escalators.
Do not drive under the influence of alcohol or drugs.
One person at a time only, even if maximum weight is not reached.
Avoid overweight or underweight riders.
Speed is affected by road type, ambient temperature, and battery maintenance.
Maintain a safe distance from other vehicles, people, and obstacles.
Do not drive in rain, wet floors, or puddles deeper than 2cm.
Avoid driving on snow, ice, or mud.
Do not use in unsafe or dangerous circumstances.
Keep away from fire.
Ride at a controlled, slow speed on uneven surfaces, bending knees to absorb impacts.
Do not ride in traffic lanes or residential areas where vehicles and pedestrians are allowed.
Always steer clear of obstacles.
Do not ride with any adult or child.
Do not step on the rear mudguard.
Do not take hands off handlebars while riding.
Do not try to ride up or down stairs or jump over obstacles.
Do not accelerate when going downhill.
Do not press the accelerator while walking the scooter.
Do not hang bags or heavy accessories on handlebars.
Always keep both feet on the deck.
Do not turn the handlebar violently during high-speed riding.
Do not ride into puddles deeper than 2cm.
Do not touch the disc brake.

Maintenance Features

Routine Cleaning and Maintenance:

Ensure the charging cable is not connected and the e-scooter is powered off before cleaning.
Wipe the e-scooter with a soft damp cloth.
Do not use alcohol, gasoline, kerosene, or other corrosive/volatile chemical solvents for cleaning.
Do not use a water cannon to clean the e-scooter.
Avoid water or other liquids entering the e-scooter's internal electronics.
Do not disassemble, repair, modify, or change the structural design of the e-scooter independently.
Refer to your local retailer for replacement parts or authorized after-sale offices for repairs.
Regularly check and re-tighten self-tightening nuts and fastenings.

Adjusting the Brake Disc: If the brake is too tight, use a hex wrench to counterclockwise screw the brake disc tensioner pulley, slightly increasing the length of the tail brake cable. If the brake is too loose, loosen the tension pulley, pull the brake cable to slightly shorten its length, then tighten the tension pulley.

Adjusting the Handlebar: To adjust the staggering of the steering rack, use a hex wrench to tighten two screws near the folding mechanism.

Battery Charging:

Charge the battery before first use.
Stop riding and charge the battery when the power indicator shows very low energy or the warning indicator (5) turns on.
Recharge after each ride to extend battery service life.
Charge in a safe, dry, and clean environment.
The kickscooter must be powered off during charging.
Do not charge overnight or when unable to observe the e-scooter.
Charge and store in an open dry area, away from combustibles.
If giving as a gift, leave it partially charged until ready for use.
Only use the original charger.
Do not charge if the temperature is below 0°C.
Do not attempt to open the battery or insert objects inside it.
If the battery is completely empty (0% charge), a normal 4-5 hour charge may not be sufficient; a 24-hour charge is necessary.
Charge the battery every 2 months, even if the kickscooter is not used.
Charging time is around 4-5 hours. Too long charging time will affect battery life.
When the indicator light turns green, the battery is fully charged. Stop charging to prevent reduced battery life.
Recommended charging temperature: 0°C ~ 40°C. Humidity level during charge: 5%~95%.

Storage of the Electric Kickscooter:

Ensure the battery is fully charged before long-term storage.
Charge the battery every 2 months.
Do not store the kickscooter below 0°C.
Store in a dry and cool indoor place, ideally in its original packaging or covered to protect from dust.
Avoid long-term sunlight exposure, overheating, or over-cooling environments, as these can accelerate the aging of the product, wheels, and battery.

Disposal:

Battery Disposal: According to European Directive 2006/66/CE, batteries should not be disposed of with household waste. Separate batteries from other waste types and recycle them through a local, free battery return system.
Product Disposal: According to European Directive 2012/19/UE, the product and its electronic accessories should not be disposed of with household waste. Separate these items from other waste types and recycle them responsibly. Contact your retailer or local government office for details on environmentally safe recycling.