Red Sound SoundBITE - Page 2

1. EDIT: This knob can be used to manually set a BPM value if no beat information is detected and also to adjust
the synchronisation point of all the recorded loops relative to the audio input source. In [LOOP EDIT] mode this
knob can be used to adjust the synchronisation point of recorded loops relative to the audio input source
and also set the output level of each loop [+6/-20dB].
individual
2
PAGE
SoundBITE - DJ Loop Sampler
Top/Front Panels
TOP/FRONT PANEL FEATURES
BEAT
BEATS
BEATS
BEATS
BEATS
BEATS
[+/up][-/down]
LOOPS OUT
FWDREV
INPUTPOWER
PHONES
Red
Sound
the colour of music
EDIT
8
4
1
16
4
2
BPM
TAP/CLEAR
(*BPM RANGE)
DISENGAGE
ENGINE
SAMPLE MODE
CYCLIC / HOLD / REVERSE
ERASE ALL RE-SAMPLE
SoundBITE
AUTO - LOOP MODULE
1
2
3
7
8
4
56
9