B1500002
English 1 (6)
SB, Back Pack Blower impeller rework, EBZ7500,
EBZ7500RH, EBZ8500, EBZ8500RH, 2015-11
This SB replaces B1500001.
Affected models and serial numbers
All products in Table 1 manufactured before the specified serial number.
Table 1: Affected models and PNC. Serial number specifies the introduction of modified impeller in production.
Description
We have received reports of rattling fans on the backpack blowers. The main reason is that the four metal
sleeves that are cast into the impeller can come loose from the surrounding plastic. Modified metal sleeves
that prevent play are now cast into impeller 589 26 61-01 (in production 17 August 2015 as from serial
number in Table 1).
Tools required for reworking:
10mm socket
T-handled tap set M5 (5mm x 0,8)
Air to blow out shavings
T27 Torx bit
Torque wrench, up to 12Nm required.
Parts information
New part no. Part description Old part no.
589 26 61-01 (fans produced after 03 Aug -15) Fan 576 56 15-01
Action
Service of unused blowers is not required. If a problem with the fan/impeller occurs, perform
service/update through normal warranty process.
Warranty reporting
Component code: 806 - Fan / Impeller
Defect code: 92 - Part exchanged on request by Husqvarna
Text: B1500002
Time units (6 minutes): 7 units
Affected market(s): All
Warranty type: If unit has been sold to a customer; use 01 – warranty
If unit has not been sold to customer; use 04 – requested by factory
To Next Page
Need help?
General
