To Next PageTo Next Page
Need help?Do you have a question about the RedMax G621AVS and is the answer not in the manual?
Identifies symbols for fuel and oil refueling ports.
Explains symbols for stop switch, choke, and speed adjustments.
Shows the symbol indicating chain brake operation.
Specifies the correct gasoline to oil mixture ratio and chart.
Provides step-by-step instructions for mixing fuel correctly.
Detailed steps for starting the chainsaw engine safely.
Procedure to verify chain oil flow after starting the engine.
Instructions for fine-tuning carburetor settings for optimal performance.
How to use the system to prevent carburetor icing in winter.
Explanation and confirmation of the automatic chain brake function.
Steps to safely shut down the chainsaw engine.
How to use the chain brake and safe practices to avoid kickback.
Steps and safety for felling trees, including notch and felling cuts.
Techniques and safety for cutting logs and branches.
Methods for sawing logs lying on the ground.
Techniques for sawing logs suspended off the ground.
How to cut limbs of fallen trees, considering tension.
Safe methods for pruning branches on standing trees.
Tasks to perform after every use, like cleaning air filter and oiling port.
Cleaning the bar groove and oiling port, and greasing the sprocket.
Regular checks for cylinder fins, fuel filter, and oil tank.
Cleaning and setting the spark plug gap.
Checking the sprocket for wear and cracks.
Inspecting and cleaning the spark arresting screen.
Guidelines and standards for sharpening saw chain cutters.
Reversing the bar and checking for rail wear.
Solutions for issues like no start or difficulty starting the engine.
Troubleshooting for lack of power, poor acceleration, or rough idling.
Solutions for when the chain oil does not come out correctly.
General
