Redsbaby JIVE 3 - Adjusting the Safety Harness Straps

A1
B1
A2
B2
D
C
Adjusting the straps
1 Adjust the shoulder strap
(A1) and (A2), waist straps
(B1) and (B2) and crotch
strap (D) to the desired fit.
2 Adjust the shoulder strap
height by feeding the
shoulder straps (located
at the back of the seat)
through to the front of
the seat.
3 Place the strap at the
desired height and feed
the excess tab into the
back of the seat.
Note: Position the shoulder
straps just above your child’s
shoulders.
REDSBABY.COM.AU