EasyManua.ls Logo

REED R8090 - Operating Instructions; Battery Replacement

REED R8090
4 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
reedinstruments
w ww
c om
3
Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
Black
Rich Black -
20/20/20/100
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Only if you REALLY need them:
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
Pantone 123 Yellow - 0/27/100/
INSTRUMENTS
Operating Instructions
Insertthemicrophoneundertestingintothecalibrator’smicrophone
cavityandensurethatitisfullyinserted(soundlevelmeterswith1/2”
microphonescanbecalibratedwiththisdevice).
Slidetherangeswitchtothe94dBposition,orthe114dBpositionas
desired.Thecalibratorgeneratesasignalassoonastheswitchisset.
Readthesoundlevelmeter’svalue.Thesoundlevelmetershouldread
94dBor114dB,dependingonthecalibrator’ssignallevel.Ifthesound
levelcalibratordoesnotmatchthecalibrator’ssignal(withinspecication),
adjustitasexplainedinthesoundlevelmeter’soperatinginstructions.
Slidetherangeswitchtothe“OFF”positionandremovethemicrophone.
Battery replacement
Replacethebatterywhenthereisnosoundpressureoutputfromthe
soundlevelcalibrator.
Openthebatterycovertoaccessthe9Vbattery.Removethebatteryand
replacewithnew9Vbattery.
ForserviceonthisoranyotherREEDproductorinformationonother
REEDproducts,contactREEDInstrumentsatinfo@reedinstruments.com
www.reedinstruments.com
1-877-849-2127 | info@reedinstruments.com

Related product manuals