REED SC-05 - Operating Instructions; Battery Replacement

reedinstruments
www
com
3
Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
Black
Rich Black -
20/20/20/100
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Only if you REALLY need them:
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
Pantone 123 Yellow - 0/27/100/
Operating Instructions
Insertthemicrophoneundertestingintothecalibrator’smicrophone
cavityandensurethatitisfullyinserted(soundlevelmeterswith1/2”
microphonescanbecalibratedwiththisdevice).
Slidetherangeswitchtothe94dBposition,orthe114dBpositionas
desired.Thecalibratorgeneratesasignalassoonastheswitchisset.
Readthesoundlevelmeter’svalue.Thesoundlevelmetershouldread
94dBor114dB,dependingonthecalibrator’ssignallevel.Ifthesound
levelcalibratordoesnotmatchthecalibrator’ssignal(withinspecication),
adjustitasexplainedinthesoundlevelmeter’soperatinginstructions.
Slidetherangeswitchtothe“OFF”positionandremovethemicrophone.
Battery replacement
Replacethebatterywhenthereisnosoundpressureoutputfromthe
soundlevelcalibrator.
Openthebatterycovertoaccessthe9Vbattery.Removethebatteryand
replacewithnew9Vbattery.
ForserviceonthisoranyotherREEDproductorinformationonother
REEDproducts,contactREEDInstrumentsatinfo@reedinstruments.com