Reef Factory Reef flare User Manual

Reef flare device manual
2/14
Apart from the Reef flare device itself, the package contains the following elements: a power cord,
a dedicated power supply unit, a magnet that can be used to reset the device and an abbreviated
manual. In order to set up the device correctly, follow the steps below.
We recommend the purchase of a dedicated fastening system which is a separate accessory not
included in the set.
1. Install the lamp above the aquarium so that it illuminates the maximum area of the tank
bottom.
2. If you install the lamp using the dedicated fastening system, assemble it in accordance with
the attached instruction. After assembly check whether all elements are screwed together
correctly to avoid possible device damage.
3. After installation, connect lamp power supply using a dedicated power supply unit included in
the set.
4. The device can be set up via a browser on a computer, laptop, tablet or smartphone. To do
so, you’ll first need to view the list of Wi-Fi networks available on the device. Then connect to
the network with a name corresponding to the serial number of your device, in accordance
with the following pattern: RFRFXXXXXXXXXXXX. Our device is compatible with 2.4 GHz
networks.
To log in, enter the following password: reeffactory
5. Open an Internet browser on the same device and type the following address in the “website
address” field:
www.reefflare.io

Reef Factory Reef flare Specifications

General

Brand	Reef Factory
Model	Reef flare
Category	Work Light
Language	English