11
Maintenance
Do not wipe the product with paint thinner, benzine or
alcohol. Doing so could cause deformation or cracking of
parts and lead to product damage.
How to care for this product
(1) Wipe off smudges such as
fingerprints with the Cleaning
Cloth.
How to care for this product when it is
significantly dirty
(1) Clean off any dirt.
Rinse the product with cold or
lukewarm water (35°C / 95°F or below).
If the product needs further
cleaning, wipe with a wrung-
out cloth that has been soaked in
water-diluted neutral detergent.
After wiping, wash with water.
(2) Hold the product upright and
shake it up and down to remove
any water remaining inside.
Hold the product as shown so that
the moving part of the rollers does
not move. Here, make sure your
fingers and skin do not get pinched
by the moving part.
Some remaining water may leak
from the gaps of the rollers and the
product itself. However, this is not
a problem with the product.
To Next Page
Loading...
