REFLECTS LEONARDO DA VINCI AERIAL SCREW User Manual

Nicht für Kinder unter 3 Jahren geeignet, da Kleinteile verschluckt werden können.
Not designed for children under 3 years, as there are small parts that may be swallowed.
Ne convient pas aux enfants de moins de 3 ans car les petites pièces peuvent être avalées.
Niet geschikt voor kinderen jonger dan 3 jaar,
aangezien de kleine stukken ingeslikt kunnen worden.
No apropiado para niños de menos de 3 años ya que piezas pequeñas se pueden tragar.
Non adatto ai bambini al di sotto dei 3 anni , alcuni componenti potrebbero essere ingeriti.
51759 AL.indd 2 25.06.2013 14:07:04

REFLECTS LEONARDO DA VINCI AERIAL SCREW Specifications

General

Brand	REFLECTS
Model	LEONARDO DA VINCI AERIAL SCREW
Category	Toy
Language	English

Summary

Kit Components

Parts List

Detailed listing of all included parts and their quantities.

Support Dowel Specifications

Specifies the lengths of wooden dowels for canopy support.

Assembly Guide

Step 1: Initial Gluing and Drying

Instructions for gluing the crankshaft to the handle and drive shaft holder to the base.

Step 2: Upper Platform and Mast Assembly

Assembling the outer ring, mast collar, and mast supports.

Step 3: Mast Support Assembly

Inserting the mast into the collar and ensuring correct positioning.

Step 4: Inserting Canopy Support Dowels

Attaching the canopy support dowels to the mast structure in sequence.

Step 5: Assembling the Base

Connecting platform supports with dowels and assembling the crankshaft mechanism with gears.

Step 6: Completing Base Assembly

Attaching the small gear to the base holder and meshing gears with supports.

Step 7: Finalizing Base Assembly

Gluing the platform onto supports, adding the inner ring, and assembling the pushing drum.

Step 8: Attaching the Canopy Rim

Lining up and gluing the upper and lower canopy rims to the support structure using clothespins.

Step 9: Applying the Canopy Cloth

Gluing the two cloth canopies to the rim and supports, ensuring proper alignment.

Step 10: Connecting Canopy to Base

Securing the mast to the drive shaft and fine-tuning the canopy height.

Step 11: Attaching the Strings

Tying strings to screw eyes and wrapping them around the bar for the spinning mechanism.

Step 12: Final Checks and Operation

Placing the canopy back on the base, testing the spinning action, and fine-tuning.