Reflexion LDDW190 - Page 63

CHANNEL MENU (SATELLITE)
Sender Menu Satellite
1. Press the [INPUT] key.
2. Use the [▲ ▼] buttons to navigate in the menu.
3. Select "Satellite" and confirm your entry with the [OK] key.
4. Press the [MENU] key and navigate to "Sender".
5. Confirm the entry with the [OK] key.
The following menu items are available in the "Channel" menu:
Auto Tuning / Programme Edit / Signal Information
/ CI Information / Dish Setup
Auto Tuning
1. Select the menu item "Automatic station search" and press the [OK] key.
2. Use the [▲ ▼ ◄►] buttons to select the various setting options.
3. Confirm the entry with the [OK] key.
4. The search starts.
5. To pause the station search, press the [EXIT] key.
The following setting options and menu items are available:
Country: Select the country.
Satellite: Select the satellite. Astra 19.2E is set as default.
Scan Mode: Default / blind Scan / Network Scan
Channel Type: All Channels / FTA Channels
Service Type: All / DTV / Radio
Programme Edit
1. Select the menu item "Edit channel list" and press the [OK] key.
2. Use the [▲ ▼] buttons to navigate in the menu item.
Note:
A detailed description can be found in the operating instructions under the item "Programme Edit".
Signal Information
The menu item is only available in DTV (DVB-C / T) / satellite mode.
The signal information includes:
Transmitter / Quality / Signal / Network / Modulation
1. Select the menu item "Signal Information" and press the [OK] key.
2. Use the [MENU] key to return to the "Station" menu.
3. Using the [EXIT] key
Note:
The menu item can only be selected when a signal is present.