Set the 5V supply voltage for external antennas at the
DVB-T2/C connection On or Off.
Edit the channel list.
Red button: Delete a selected channel.
Yellow button: Move a selected channel to the desired
position.
Blue button: Skips the marked station when switching
through.
: Marks the selected station with a heart. Press the
button again to stop favouring the channel.
Press the key when the menu is closed to open the
Favourites list.
DVB-S Channel Export (USB)
Export your configured satellite list as a backup to USB.
DVB-S Channel Import (USB)
Import your satellite list stored on USB.
Satellite Dish Setup
(Satellite / Transponder)
Manage the transponders or satellites and adjust the
LNB settings.
: Switch between the satellite and transponder list.
Red button: Delete a selected transponder or satellite.
Green button: Edit a selected transponder or satellite.
Yellow button: Add a new transponder or satellite.
Blue button: Start the search on a selected transponder
or satellite. The existing channel list is deleted.
Satellite Dish Setup
(LNB Settings)
Note:
Normally, no adjustment needs to be made in the
LNB settings. The setting is only recommended for
experienced users.
Select the desired satellite and press the key to
enter the LNB setting.
LNB Type: Adjust the setting based on your LNB.
LNB Power: Set the LNB voltage for horizontal / vertical
switching.
13V/18V (Default)
Off
22Khz: Control signal for low / high switching.
Auto (Default)
On
Off
Unicable Setting: Set the Unicable setting according to
your Unicable satellite system.
IF Freq: Press the key to open the frequency
selection. Press the key again to edit the
To Next Page
Loading...
