Select the disc audio track during playback. Only if available on the
disc.
Disk settings menu
1. In DVD mode, press the button to open or close the disc settings menu.
Note:
Use the key to return to the previous menu item.
2. The following setting options are available in the menu.
TV Display: Set the aspect ratio.
OSD Language: Select the language for the disc settings menu.
Last Memory: Set whether the disc should start from the last
playback (On) or always start from the beginning (Off).
Downmix: Select the output sound format.
LT / RT: A mono signal is output to the left and right
speakers.
Stereo: A stereo sound signal is output.
Dynamic: Set the Dolby dynamic range.
Sharpness: Adjust the sharpness.
Brightness: Adjust the brightness.
Contrast: Adjust the contrast.
TV Type: You can choose between PAL / Multi / NTSC
Audio: Select the preferred language for disc playback.
Subtitle: Select the preferred subtitle language for disc playback.
Disc Menu: Select the preferred disk menu language.
Parental: Select the level for the protection of minors. If a disc of a
higher age is inserted, a password request appears.
Password: Adjust the password. The standard password is: 0000
Default: Resets the settings in the disc settings menu to the default
values.