Reflexion LEDW190 - Page 61

UK
61
 Band
Signal Information
Shows reception information of the selected station. Only active
if a station has been found.
CI Information
Displays information about the inserted CI module and the card.
Only active when a CI module is inserted. The module and card
are not included in the scope of delivery and must be purchased
separately from the reception provider.
LCN
LCN: Set the LCN On or Off. If LCN is set to On, the yellow button
is not displayed in the edit channel menu.
Software Update
(USB)
Start the software update.
DVB-T
Auto Tuning
Tune Type:
 DTV + ATV / TV / ATV
Select country:
 Select the country according to the installation site.
Press the button to start the search.
DVB-T Manual Tuning
Channel:
 Select the channel. The frequency above the signal bar
changes depending on the selection of the channel.
Signal bar:
 Indicates the signal strength.
Press the button to start the search.
ATV Manual Tuning
The following options are available in the menu item ATV Manual
Tuning.
Storage to:
 Select the program number on which the station should be
saved.
Sound system:
 BG
 I
 DK
 L
Color system:
 Auto
 PAL
 SECAM
Current:
 Select the current station to be changed.