Reflexion LEDW190+ - Page 62

UK
62
Search:
 Press the or button to start the search.
Fine tune:
 Press the or button to fine tune the frequency.
Programm Edit
Red button:
 Delete selected station.
Yellow button:
 Move a selected channel to the desired position.
Blue button:
 Lets you skip the marked station when switching through.
FAV:
 Marks the selected station with a heart.
 Press the button when the menu is closed to open
the favorites list.
Button 0:
 Delete the complete channel list.
Signal Information
Shows reception information of the selected station. Only active
if a station has been found.
CI-Information
Displays information about the inserted CI module and the card.
Only active when a CI module is inserted. The module and card
are not included in the scope of delivery and must be purchased
separately from the reception provider.
5V antenna power
Set the 5V antenna power for external antennas at the
connection "TV2 DVB-C / T2HD)" On or Off.
LCN
LCN: Set the LCN On or Off. If LCN is set to On, the yellow button
is not displayed in the Program edit menu.
Software Update
(USB)
Start the software update.
DVB-C
Auto Tuning
Starts the automatic station search.
Scan Mode:
 Full
 Network scan
Frequency (KHz):
Only available if the search mode is set to Network Scan.
 Auto
 Manually