Reflexion LEDW190+ - Page 64

UK
64
Fine Tune:
 Press the or buttons to fine tune the frequency.
Programm Edit
Red button:
 Delete selected station.
Yellow button:
 Move a selected channel to the desired position. LCN must
be set to Off.
Blue button:
 Lets you skip the marked station when switching through.
FAV:
 Marks the selected station with a heart.
 Press the button when the menu is closed to open
the favorites list.
Button 0:
 Delete the complete channel list.
Signal Information
Shows reception information of the selected station. Only active
if a station has been found.
CI- Information
Displays information about the inserted CI module and the card.
Only active when a CI module is inserted. The module and card
are not included in the scope of delivery and must be purchased
separately from the reception provider.
5V antenna power
Set the 5V antenna power for external antennas at the
connection "TV2 DVB-C / T2HD)" On or Off.
LCN
LCN: Set the LCN On or Off. If LCN is set to On, the yellow button
is not displayed in the Programm edit menu.
Software Update
(USB)
Start the software update.
PICTURE
In the picture menu you can adjust and save the picture settings according to your needs.
1. Press the button to open the TV menu.
2. Use the buttons to select the Picture menu item.
3. Press the button to enter the Picture menu.
4. The following menu items are available in the Picture menu:
Picture Mode
The following preset picture modes are available in Picture
Mode.
 Standard (Fixed picture settings.)
 Dynamic (Fixed picture settings.)