28
Note:
The recording function only works in USB and micro SD card
mode.
The files are saved on a USB / Micro SD card.
TWS FUNCTION
If you have two units of this model, you can use the TWS function to
connect the two units to get stereo sound.
1. Turn on both PS09BT speakers.
2. The two speakers are divided into HOST one and DEPUTY one..
3. After switching on, press and hold the " " button on the Deputy
speaker for approx. 3 seconds and "SLAU" will appear on the LED
display.
4. Then activate the Bluetooth function on the "HOST" device in order
to connect the two devices.
5. TWS can only be used in USB / Micro SD card / LINE-IN / Bluetooth
mode at a time.
6. The following functions cannot be used in TWS mode: microphone,
recording, playback. Delete recording and microphone priority
functions. Only music playback is available.
7. Playback can only be controlled via the "HOST" device.
8. The disco lighting must be set on the device.
9. Press and hold the " " button on the host / slave device to
disconnect the TWS connection.
NOTE:
This function only works when there are 2 PS09BT series
speakers.
To Next Page
