Reflexion TRA23i - Network Settings and Wi-Fi Setup

GB
15
 WiFi channels
Select the WiFi channel according to the country you are in.
 Add / Remove AP
1) Add AP (scan)
Displays a list of available networks.
2) Add AP (WPS button)
Select this option to connect your wireless router via WPS if the router has a WPS
button.
3) Add AP (Smart Config)
Select this option to configure the WiFi network with a smartphone via an app.
The app is available in the iOS App Store and the Android Play Store. Find and
install the “Esptouch” app.
Your smartphone is connected to the WLAN. Place the radio within about 2 meters
of the router.
1. Navigate in the radio to the menu item Network > Add/Remove AP > Add
AP (SmartConfig) and press the [OK] button to confirm.
2. Start the app on your smartphone.
3. The name of the SSID (of your Wi-Fi network) will be displayed.
4. In the app, tap on "Multicast" and then on "Confirm" to complete the
process.
5. Enter your network password.
6. The radio will begin connecting to the network and will receive an
"Assignment Complete" message when it is successfully connected to the
network. Remove AP - If you've already added a router and want to remove
it, select this option.
Note:
 Always place the radio within 2 meters of the wireless router for
setup.
4) Remove AP
Remove the network connected to the device.
 AP: (device name)
If the device was already connected to more than one router, you can manually
switch between the different access points here.
 Signal
Displays the signal level from the router. If the reception of the network is too
weak, this can affect Internet radio playback.
 IP
The IP is set to dynamic by default. Select the "Static" option to set a fixed IP for
the network connection.