31
Engine & Controls
OTHER SYSTEM CHECKS BEFORE STARTING
ENGINE
Check these components/systems before starting engine:
1. Tilt the outboard drive and check the propeller for
nicks and bent blades which will cause vibration.
2. While the outboard drive is tilted up check for any
debris around the water intakes on the vertical drive
sha housing. ese could cause the engine to overheat.
3. Check steering system fasteners at the engine and all
related hydraulic hoses and connections for signs of leaks
including the ones under the helm.
4. While the shroud is o check for any engine oil leakage
or fuel puddling.
5. Check engine transom mounting fasteners for
tightness.
6. Repair any signs of leakage and loose fasteners and
hoses before attempting to start the engine.
7. Ensure that you use the 1/3 rule for determining if you
have adequate supplies for the trip. Fill up as needed,
8. Check all throttle and shi cable linkages at powerhead
for tightness.
9.
When nished, reinstall the engine shroud ensuring all
lock levers are secure.
To Next Page
Loading...
Need help?
General
