4-6
No Diving or Jumping. Observe all Safety Rules
C. INSTALLATION OF TOP LEDGE AND LEDGE COVERS
GENERAL INSTRUCTIONS - ROUND POOLS
ASSEMBLING THE POOL FRAME
Secon
4
b. Slide the exterior ledge cover into the ledge cover
guide. (Image 18)
c. Align the spacer with ledge cover by using a
small screw driver and attach the interior and the
exterior ledge covers to the top plate with a screw
(VHL12x114S). (Images 19 & 20)
Note: During assembly, the inner and outer
components of the ledge cover may have been
slipped into each other for packaging purposes.
Important Note:
We suggest that you install all the top ledges on the
wall before attaching them.
20
18
19
To Next Page
Loading...