Need help?Do you have a question about the Reinhausen MESSKO MTO-ST160 and is the answer not in the manual?
General| Temperature range | -40°C to +160°C |
|---|---|
| Protection class | IP54 |
| Power Supply | 24 V DC |
| Ambient Temperature | -40°C to +85°C |
| Sensor Type | Pt100 |
| Application | Transformers |
| Output Signal | 4-20 mA |
| Type | Oil temperature measuring device |
Defines the product's intended application for stationary industrial electrical energy systems.
Outlines essential safety measures for transport, installation, operation, maintenance, and disposal.
Specifies requirements for personnel responsible for assembly, commissioning, operation, and inspection.
Details requirements for protecting power circuits using overcurrent protection and isolating devices.
Details the connection conditions for the standard flange on the oil conservator.
Outlines connection conditions for the RM flange on the oil conservator.
Specifies connection conditions for the NAT/DS flange on the oil conservator.
General instructions for mounting the oil level indicator on the oil conservator.
Step-by-step guide for mounting the MTO with a radial float rod.
Step-by-step guide for mounting the MTO with an axial float rod.
Special instructions for mounting on an inclined flange if the transmitter part cannot be fully inserted.
Covers the electrical connection procedures for the oil level indicator.
Details the steps for correctly preparing connection cables for the device.
Explains how to connect the device using cable screw or NPT connections.
Guides on connecting the oil level indicator using a connector.
Details the checks required after mounting to ensure correct operation and oil level display.
To Next Page
