REIZEN 704066 - Country Signal Selection; Selecting USA, UK, Germany, or Japan Signal

3
spacer between the case back and the metal band) otherwise the metal band will interfere
with time signal reception.
Country Signal Selection
You can set your watch to get USA (excluding Alaska and Hawaii), UK,
Germany, or Japan (60 KHz) signal.
After you change to a new country, the watch will run according to the new
time zone. Please wait when the second hand is fast running until it resumes its
normal running speed.
Select USA, UK, Germany, or Japan (60 KHz only) signal:
NOTE: USA users need to set the watch to one of the USA Time Zones as listed
below.
1. Hold S2 (4 o’clock button) while the watch is running in normal time mode for more
than 5 seconds until the watch says “Set alarm, press 2 o’clock button (S1) to set.”
2. Push S2 (4 o’clock button) another three (3) times until the watch says “Global signal
selection, only when you visit this country. Press 2 o’clock button (S1) to set.”
3. Press S1 (2 o’clock button) and the watch will say “Press 2 o’clock button (S1) to set,
4 o’clock button (S2) to confirm.”
4. Press S1 (2 o’clock button) to select either:
UK
Germany
Japan (60 KHz only)
USA, Pacific
USA, Mountain
USA, Central
USA, Eastern
5. Press S2 (4 o’clock button) to confirm after a new country has been selected.