Need help?Do you have a question about the REL Acoustics T-7 and is the answer not in the manual?
This item is heavy. To avoid risk of injury, take care when handling.
Apparatus supplied with detachable mains cord; details fuse ratings for different voltages.
Volume Control for .1/LFE INPUT.
Connection for the .1/LFE output from a 5.1 amplifier or processor.
Volume Control for HI/LOW INPUT.
Input for connecting LOW-LEVEL to the output of a preamplifier or receiver.
Label indicating a specific connection mode.
Control to select crossover frequency.
Used to set phase 0-180 degrees.
Neutrik Speakon Socket for connecting to amplifier speaker terminals.
Power ON/OFF Switch and IEC Mains Socket.
Details how to engage and disengage the Neutrik Speakon plug.
It is helpful to know that you will almost always connect the REL to the HIGH-LEVEL INPUT.
HIGH-LEVEL connection using the enclosed cable is always the first choice.
Standard procedure for connecting red, yellow, and black wires to amplifier speaker outputs.
Procedure for connecting black wire to chassis ground for differential amplifiers.
Describes wiring for stereo configuration using two REL units.
Describes wiring for a single REL as a center channel subwoofer.
Describes wiring for a single REL as a rear channel subwoofer.
An option if HIGH-LEVEL connection is not possible, using phono connectors.
Optimal placement for a REL is in a corner behind main speakers.
Choosing music with repetitive bass line for setup process.
Adjusting phase to achieve loudest or fullest sound for proper integration.
Determining precise distance from the corner for most efficient output.
Setting the crossover point and volume for subtle balance and integration.
General| Brand | REL Acoustics |
|---|---|
| Model | T-7 |
| Category | Subwoofer |
| Language | English |
To Next Page